Case 575N EP Utility Plus Backhoe Loader Pdf Operators Manual

Case 575N EP Utility Plus Backhoe Loader Pdf Operators Manual 

This manual provides essential guidance for operators and maintenance personnel to ensure safe, efficient, and reliable machine performance.

• GENERAL INFORMATION
  • Foreword
  • Intended use
  • Electro-magnetic compatibility (EMC)
  • Product identification
  • Component identification
  • Read the operator’s manual
  • Operator’s manual storage on the machine
  • Machine orientation
  • Exhaust Gas Recirculation (EGR) exhaust treatment – Product overview
  • Exhaust Gas Recirculation (EGR) exhaust treatment – Product overview
• SAFETY INFORMATION
  • Safety rules
  • Roll over protective structure (ROPS) (If equipped)
  • Frame – Foreword
  • Safety rules – Utility precautions
  • Safety rules – Fuel handling precautions
  • Safety rules – Specific precautions to this machine
  • Safety rules – Ductile iron
  • Hand signals
  • Safety signs
• CONTROLS AND INSTRUMENTS
  • ACCESS TO OPERATOR’S PLATFORM
    • Machine access
    • Cab windshield and windows – Open/Close
  • OPERATOR’S SEAT
    • Operator’s seat
  • FORWARD CONTROLS
    • Front controls
    • Pedal controls
    • Transmission controls
  • RIGHT-HAND SIDE CONTROLS
    • Right-hand side controls
  • INSTRUMENT CLUSTER
    • Front control panel
    • Instrument cluster panel – Side
    • Instrument cluster
    • Heating, Ventilation, Air Conditioning (HVAC) controls
  • CAB CONTROLS AND ADJUSTMENTS
    • Cab and platform – Control identification
    • Dome light
    • Advanced instrument cluster
    • Menu screen display
    • Telematics
  • LOADER ATTACHMENT CONTROLS
    • Loader attachment controls
    • Loader attachment – Operation
  • BACKHOE ATTACHMENT CONTROLS
    • Booms, dippers, and buckets – Control identification
    • Backhoe mechanical two stick controls (if equipped) version
    • Backhoe attachment hydraulic controls (If equipped) version
    • Backhoe attachment pilot hydraulic controls (If equipped) version version
  • STABILIZER MECHANICAL CONTROLS
    • Left-hand stabilizer control lever
    • Right-hand stabilizer control lever
• OPERATING INSTRUCTIONS
  • COMMISSIONING THE UNIT
    • Commissioning the machine
    • Run in period of a new machine
    • Engine speed
    • Operating the machine
    • Road operation
    • Job site operation
    • Before starting the engine
  • STARTING THE UNIT
    • Starting the engine
    • Normal engine starting
    • Assisted starting (Jump-starting)
    • Hot temperature operation
    • Cold temperature operation
  • STOPPING THE UNIT
    • Shutting down the engine
    • Uniform braking
    • Machine direction
    • Before operating the machine
  • MOVING THE UNIT
    • Moving the unit
    • Traveling on a hill
    • 2WD or 4WD
  • PARKING THE UNIT
    • Parking the unit
• TRANSPORT OPERATIONS
  • ROAD TRANSPORT
    • Requirements for road travel
    • Precautions for road travel
  • PREPARING FOR ROAD TRANSPORT
    • Preparing the machine for road travel
    • Setting the backhoe attachment in road travel position
    • Locking or unlocking the backhoe attachment
    • Locking or unlocking the backhoe attachment
  • SHIPPING TRANSPORT
    • Machine transport (on a trailer)
  • RECOVERY TRANSPORT
    • Towing the machine
• WORKING OPERATIONS
  • GENERAL INFORMATION
    • Operating the machine in high altitude
    • Operating the machine in high temperatures
    • Operating the machine in cold weather
    • Warm up procedure
    • Operating the machine in water
    • Lifting the machine
    • Auto engine protection shutdown setting
    • Auto engine shutdown time-out adjustment
  • LOADER ATTACHMENT
    • Organizing the job site
    • Transmission disconnect button
    • Operating the loader attachment
    • Loader attachment safety strut
    • Loader bucket – Removal
    • Loader bucket – Install
  • BACKHOE ATTACHMENT
    • Backhoe attachment
    • Setting the backhoe attachment in working position
    • Stabilizer control – Operating – center pivot machines
    • Operating the backhoe attachment
    • Filling the backhoe bucket
    • Moving the machine forwards when working
    • Personal safety
    • Basic instructions
    • Backhoe danger area
    • Trenching
    • Backhoe bucket Remove
    • Backhoe bucket Install
    • Backhoe bucket – Digging angle
• MAINTENANCE
  • GENERAL INFORMATION
    • Safety rules
    • General safety before you service
    • Engine hour meter
    • Hood latch
    • Fire extinguisher
    • Battery access and care
    • Consumables
    • Organic Acid Technology (OAT) coolant
    • Engine oil temperature chart
    • Fuel
    • General specification – Diesel fuel
    • General specification – Biodiesel fuels – Biodiesel fuels
    • Fuses and relays
    • Fuse, relay, and diode icon definitions
    • Diagnostic/Service tool port
    • Fuel storage
    • Fuel tank
    • Hydraulic oil
    • Hydraulic oil tank
    • Safety instructions
    • Machine safety
    • Work hours and intervals
    • CCV Insulation hose
  • MAINTENANCE CHART
    • Maintenance chart
  • At warning message display
    • Fuel water separator drain
    • Hydraulic oil filter – Replace
  • First 10 hours
    • Air conditioner compressor belt (If equipped)
  • Every 10 hours or daily
    • Service brake
    • Parking brake
    • Fuses and lamps
    • Functionality of controls and lamps
    • Engine oil level – Check
    • Transmission oil level – Check
    • Hydraulic oil level – Check
    • Fuel tank level – Check – Level
    • Grease points – Lubricate
  • FIRST 50 HOURS
    • Transmission oil filter – Replace
    • Battery electrolyte level – Check
    • Rear axle Axle support – Tighten
  • EVERY 50 HOURS
    • Coolant reservoir fluid level – Check
    • Fuel water separator drain
  • FIRST 100 HOURS
    • Fuel filter – Change
    • Mud filter – Change
  • EVERY 100 HOURS
    • Wheels re-torque
    • Hydraulic system breather – Clean
    • Battery check
    • Front axle breather (4WD Only) – Clean
    • Rear axle differential oil – Check
    • Cabin mounting bolts re-torque
    • Front axle hub oil level (4WD only) – Check
  • EVERY 250 HOURS
    • Air conditioner compressor belt (If equipped)
    • Air-conditioning compressor seals (If equipped)
    • Fuel injection system – Replace
    • Cab air filters – Cleaning
  • EVERY 500 HOURS
    • Engine oil and oil filter – Change
    • Mud filter – Change
    • Fuel filter – Change
    • Fuel strainer – Replace
    • Front axle hub oil (4WD Only) – Replace
  • EVERY 1000 HOURS
    • Engine air filters – Replace
    • Powershuttle transmission – oil change
    • Transmission suction strainer – Cleaning
    • Hydraulic oil filter – Replace
    • Rear axle hub oil – Replace
    • Front axle differential oil (4WD Only) – Replace
    • Rear axle differential oil – Replace
    • Front axle – Hub greasing 2WD
    • Hydraulic oil – Replace
    • Cab air filter – Replace
  • EVERY 1500 HOURS
    • Engine Crankcase Ventilation (CCV) filter
  • EVERY 2000 HOURS
    • Brake oil – Replace
    • Hydraulic oil – Replace
    • Hydraulic oil strainer – Replace (If equipped)
  • EVERY 4000 HOURS
    • Engine coolant – Change
  • AS REQUIRED
    • Radiator – Cleaning
    • Fan / alternator belt – Replace
    • Air filter secondary element
    • Bleed air from the fuel system
    • Tires pressure – Check
    • Condenser – Cleaning
    • Dipper cylinder – Cleaning
  • STORAGE
    • Storing the machine
    • Short term storage
    • Storing the engine
    • Battery storage
    • Taking the machine back to service
    • Removal from storage
• TROUBLESHOOTING
  • SYMPTOM(S)
    • Display screen messages
    • Engine – Troubleshooting
    • Starter motor – Troubleshooting
    • Alternator – Troubleshooting
    • Transmission – Troubleshooting
    • Axles – Troubleshooting
    • Steering System – Troubleshooting
    • Hydraulic systems – Troubleshooting
    • Hydraulic systems – Troubleshooting
    • Loader attachment – Troubleshooting
    • Backhoe attachment – Troubleshooting
    • Swing – Troubleshooting
    • Hydraulic pump – Troubleshooting
    • Electrical systems – Troubleshooting
    • Heating, ventilation, air conditioning (HVAC) – Troubleshooting
• SPECIFICATIONS
  • Specifications
  • Engine specifications
  • Transmission specifications
  • Steering general specifications
  • Hydraulic system specifications
  • Electrical system specifications
  • Loader bucket specifications
  • Backhoe bucket specification
  • Material weights – Material
  • Torque chart – Metric non-flanged hardware
  • Torque chart – Metric flanged hardware
  • Identification
  • Torque chart – Inch non-flanged hardware
  • Torque chart – Inch flanged hardware
  • Identification
  • Units of measure and conversion
• ACCESSORIES
  • Loader bucket
  • Backhoe buckets
  • Loader bucket with forks
  • Auxiliary hydraulic valves and lines – Overview
  • Telematics – Overview

Fast Download Speeds
Online & Offline Access
Access PDF Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual