Case CX300E Crawler Excavators Pdf Operators Manual (91814487)

This manual provides essential guidance for operators and maintenance personnel to ensure safe, efficient, and reliable machine performance.

• GENERAL INFORMATION
  • Note to the Owner
  • Intended use
  • Electro-Magnetic Compatibility (EMC)
  • Telematics
  • Manual scope and required training level
  • Product identification
  • Operator’s manual storage on the machine
  • Machine orientation
  • Machine components
  • After Treatment System
• SAFETY INFORMATION
  • Signal word definitions
  • Safety rules
  • Ecology and the environment
  • Hand signals
  • Safety signs
• CONTROLS AND INSTRUMENTS
  • Access to operator’s platform
    • Door and steps
  • Operator’s seat
    • Operator’s seat
  • Forward controls
    • Forward controls
    • Windshield
    • Front lower window
  • Left-hand side controls
    • Left-hand side controls
    • Gate lock lever and safety bar
    • Cab internal lighting
    • Emergency exit hammer
    • Sliding windows on door
  • Right-hand side controls
    • Right-hand side controls
    • Instrument cluster
    • Heating, ventilation or air-conditioning control
    • Radio
  • Rearward controls
    • Fuse box
    • Magazine rack
    • Refrigerated/heated compartment
    • Storage compartment
    • Coat hanger hook
  • Overhead controls
    • Roof curtain
    • Roof hatch
    • Sunshield
  • Exterior controls
    • Cab protection (ROPS and FOPS)
    • Rain deflector (if equipped)
    • Mirrors
    • Cameras
    • Side doors
    • Battery disconnect switch
    • Engine hood
    • Lower panels
    • Windshield washer reservoir
    • Towing holes
    • Front storage box
    • Fire extinguisher
    • Rotary light cable
    • Fuel tank
    • Fuel tank filler pump (if equipped)
    • After Treatment System
• OPERATING INSTRUCTIONS
  • Starting the unit
    • Security function
    • Starting the engine
    • Bringing the machine up to operating temperature
    • Operating the machine in hot or cold weather
    • Operating the machine
    • Lowering the attachment in the event of a failure
    • Bucket replacement
  • Stopping the unit
    • Stopping the engine
  • Moving the unit
    • Machine travel
  • Parking the unit
    • Parking the machine
• TRANSPORT OPERATIONS
  • Road transport
    • Loading the machine onto a transport trailer
    • Tie downs for shipping
    • Unloading the machine from a transport trailer
  • Shipping transport
    • Lifting the machine with the crane
  • Recovery transport
    • Towing the machine
• MAINTENANCE
  • General information
    • Basic instructions
    • Biodiesel fuel
    • Fluids and lubricants
    • Engine oil recommended operating temperature range
    • Releasing pressure in the hydraulic system
    • Fuel system bleeding
    • Protecting the electronic and electrical systems during battery charging or welding
  • Maintenance planning
    • Maintenance chart
  • Break-in period
    • Grease points (Bucket)
    • Cab protection (ROPS and FOPS)
    • Tightening torques
    • Track shoe bolt torque
    • Hydraulic oil return filter
    • Pilot line filter
    • Swing reduction unit oil
    • Travel reduction units oil
  • Every 10 hours
    • Engine oil level
    • Engine coolant level
    • Hydraulic oil level
    • Fuel tank
  • Every 50 hours
    • Air conditioner filters
  • Every 250 hours
    • Grease points (Bucket)
    • Swing reduction unit oil
    • Travel reduction units oil
    • Engine primary air filter
    • Batteries
    • Hydraulic oil tank
    • Tightening torques
    • Track shoe bolt torque
    • Track rollers and idler wheels
    • Cab protection (ROPS and FOPS)
  • Every 500 hours
    • Turntable bearing
    • Radiator and coolers
  • Every 1000 hours
    • Engine oil and filter
    • Fuel pre-filter
    • Fuel filter
    • DEF/AdBlue® tank vent filter
    • Grease points (Boom and arm)
    • Hydraulic tank breather filter
    • Engine air filters
    • Hydraulic fluid analysis
    • Swing reduction unit oil
    • Alternator
    • Starter motor
  • Every 1500 hours
    • Blow-by filter
    • Engine belt
  • Every 2000 hours
    • Travel reduction units oil
    • Hydraulic oil suction filter
    • Hydraulic oil return filter
    • Pilot line filter
    • Air conditioner filters
    • Swing reduction gear
    • Engine valve rocker clearance adjustment
  • Every 4000 hours
    • Engine coolant
    • DEF/AdBlue® tank suction filter
    • DEF/AdBlue® supply module filter
    • Pump outlet hoses
    • Hydraulic hoses
  • Every 5000 hours
    • Hydraulic oil and filters
  • When necessary
    • Track tension
    • Fuel tank strainer
    • Engine oil analisys
    • Gas spring inspection
    • Bulb replacement
    • Bucket teeth
    • Cylinders
    • Plastic and resin parts
    • Air-conditioning system
    • DEF/AdBlue® tank drain
  • Fuse and relay locations
    • Fuses
  • Storage
    • Preparing for storage
    • Periodic checks
    • Starting up the machine
• TROUBLESHOOTING
  • Fault code resolution
    • Engine – Troubleshooting
• SPECIFICATIONS
  • Machine specifications
  • Fluids and lubricants
  • Dimensions
  • Operating weights
• ACCESSORIES
  • Direct fit buckets
  • Auxiliary hydraulic circuits
  • Hydraulic quick coupling system
  • Quick coupler buckets
  • Ripper tooth
  • Loads handling
  • Field view monitor
  • Front Guard Protective System
  • Vandalism guard
• FORMS AND DECLARATIONS
  • California Emission Control Warranty Statement
  • US Environmental Protection Agency (EPA) Warranty Statement

Fast Download Speeds
Online & Offline Access
Access PDF Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual