Case E12D, E14D Mini Excavator Pdf Operators Manual (92710445, B280201084)

Case E12D, E14D Mini Excavator Pdf Operators Manual (92710445, B280201084)

This manual provides essential guidance for operators and maintenance personnel to ensure safe, efficient, and reliable machine performance.

• 1 - Introduction
  • 1.1 – Regarding this manual
    • 1.1.1 – Manual consultation and terminology
  • 1.2 – Machine identification data
  • 1.3 – Manufacturer
    • 1.3.1 – Contact the after-sales network
    • 1.3.2 – Spare Parts
  • 1.4 – Information to the owner of the machine
  • 1.5 – Intended use
  • 1.6 – Prohibited use
  • 1.7 – Emissions overview
• 2 - Safety
  • 2.1 – Safety symbol
  • 2.2 – General safety
    • 2.2.1 – Consulting the safety signs in the manual
  • 2.3 – Safety signs and operation related labels
  • 2.4 – Machine driver
    • 2.4.1 – Personal Protective Equipment (PPE)
  • 2.5 – Work Area – Hazard Zone – No entry zone
  • 2.6 – List of Residual Risks
  • 2.7 – Safety procedures
  • 2.8 – Safety devices
    • 2.8.1 – Operator guard structure
      • 2.8.1.1 – FOPS Level I canopy (optional)
    • 2.8.2 – Seat belt
    • 2.8.3 – Controls cut-out lever
    • 2.8.4 – Slewing locking lever
• 3 - Technical data
  • 3.1 – General data
  • 3.2 – Engine
  • 3.3 – Hydraulic system
  • 3.4 – Performance
  • 3.5 – Digging arms
  • 3.6 – Counterweight
  • 3.7 – Dozer blade
  • 3.8 – Undercarriage
  • 3.9 – Fluid capacities
  • 3.10 – Electrical system
  • 3.11 – Brakes
  • 3.12 – Nominal lifting capacity
  • 3.13 – Rotating structure
  • 3.14 – Overall dimensions
• 4 - Transporting the machine
  • 4.1 – Transportation dimensions
  • 4.2 – Loading/unloading Operations
  • 4.3 – Securing the machine on the mean of transport
  • 4.4 – Lifting of the machine
    • 4.4.1 – Lifting procedure
  • 4.5 – Recovering and pulling the machine
• 5 - Controls and tools
  • 5.1 – Description of main controls and levers
  • 5.2 – Description of left control console
  • 5.3 – Description of right control console
  • 5.4 – Roller operation
  • 5.5 – Auxiliary power socket on console
  • 5.6 – Flashing light (optional)
  • 5.7 – Control panel
  • 5.8 – Hour meter
  • 5.9 – Battery disconnect switch
  • 5.10 – Electric immobiliser (optional)
  • 5.11 – Geo-localisation system (optional)
• 6 - Using the machine
  • 6.1 – Commissioning
  • 6.2 – Battery disconnect switch
  • 6.3 – Driver’s seat
  • 6.4 – Seat belt
  • 6.5 – Controls cut-out lever
  • 6.6 – Slewing locking lever
  • 6.7 – Visibility
    • 6.7.1 – Travel position
  • 6.8 – Starting the engine
    • 6.8.1 – Inspections prior to starting
    • 6.8.2 – Procedure for starting the machine
  • 6.9 – Start-up procedure with electric immobiliser (optional)
  • 6.10 – Engine jump-starting procedure
    • 6.10.1 – Connecting the additional cables
    • 6.10.2 – Starting the engine
    • 6.10.3 – Removing the additional cables
  • 6.11 – Horn
  • 6.12 – Work lights
  • 6.13 – Operating at low temperatures
  • 6.14 – Precautions during operation
  • 6.15 – Stopping and parking the machine
  • 6.16 – Refuelling
  • 6.17 – Throttle lever
  • 6.18 – Machine movement
    • 6.18.1 – Travel movement horn (optional)
    • 6.18.2 – Forward and reverse travel
    • 6.18.3 – Pivoting the machine around its axis
    • 6.18.4 – Turning while moving forward
    • 6.18.5 – Turning while reversing
    • 6.18.6 – Precautions during the operation of the tracks
  • 6.19 – Travel speed
  • 6.20 – Dozer blade control/undercarriage width adjustment lever
    • 6.20.1 – Dozer blade control
    • 6.20.2 – Undercarriage width adjustment control
  • 6.21 – Extendible dozer blade with extensions
  • 6.22 – Boom movement
    • 6.22.1 – Left Joystick
    • 6.22.2 – Right joystick
    • 6.22.3 – TPSS Valve ISO-SAE (optional) control layout
  • 6.23 – Boom swing control
  • 6.24 – Discharge residual pressure in the hydraulic system
  • 6.25 – Boom swing/hydraulic system AUX2 selector button
  • 6.26 – Auxiliary hydraulic systems
    • 6.26.1 – Connection of equipment to the hydraulic systems
    • 6.26.2 – Connections on second boom
    • 6.26.3 – AUX1 Auxiliary hydraulic system
      • 6.26.3.1 – AUX1 hydraulic system three-way switch
      • 6.26.3.2 – Single-acting mode AUX1
      • 6.26.3.3 – Double-acting mode AUX1
    • 6.26.4 – AUX2 Auxiliary hydraulic system (optional)
  • 6.27 – Emergency lifting-boom lowering procedure
  • 6.28 – Protective structure opening procedure
    • 6.28.1 – Precautions to be taken during transport
    • 6.28.2 – Precautions to be taken when travelling in low-height spaces
    • 6.28.3 – Procedure
  • 6.29 – Procedure for installing and removing the supplementary counterweight
    • 6.29.1 – Supplementary counterweight
  • 6.30 – Daily storage
• 7 - Recommended optional equipment
  • 7.1 – Safety precautions
    • 7.1.1 – Specifications on authorised equipment
  • 7.2 – Equipment with standard coupling (pins)
    • 7.2.1 – Installation and removal
  • 7.3 – Quick-coupling
  • 7.4 – Demolition hammer
    • 7.4.1 – Installation and removal
    • 7.4.2 – Precautions when using the demolition hammer
    • 7.4.3 – Drive
• 8 - Maintenance
  • 8.1 – Safety
    • 8.1.1 – Putting the machine out of service for maintenance
  • 8.2 – Tools and equipment for maintenance
  • 8.3 – Safety devices
    • 8.3.1 – Central compartment hood
    • 8.3.2 – Rear compartment cover
    • 8.3.3 – Battery compartment guard
    • 8.3.4 – Document glove box guard
  • 8.4 – Electrical system
  • 8.5 – Tracks
  • 8.6 – Refilling
    • 8.6.1 – Refilling quantity table
    • 8.6.2 – Products for lubrication
    • 8.6.3 – Fuel
    • 8.6.4 – Engine oil
    • 8.6.5 – Cooling liquid
    • 8.6.6 – Hydraulic system oils
      • 8.6.6.1 – Requirements for using ecological hydraulic oil
      • 8.6.6.2 – Scheduled plan for analysis and control of ecological hydraulic oil
      • 8.6.6.3 – Requirements for the sampling of ecological hydraulic oil
  • 8.7 – Battery
    • 8.7.1 – Fitting and removing the battery
    • 8.7.2 – Recharging the battery
  • 8.8 – Tightening torque tables
  • 8.9 – Regular maintenance
    • 8.9.1 – Performance check
    • 8.9.2 – Check of engine oil level
    • 8.9.3 – Replacement of engine oil
    • 8.9.4 – Replacement of engine oil filter
    • 8.9.5 – Check of cooling liquid level
    • 8.9.6 – Replacement of cooling liquid
    • 8.9.7 – Check and replacement of cooling liquid sleeves
    • 8.9.8 – Cleaning the radiator
    • 8.9.9 – Check of hydraulic oil level
    • 8.9.10 – Change discharge circuit hydraulic oil filter
    • 8.9.11 – Hydraulic system oil sampling/replacement
    • 8.9.12 – Replacement of intake circuit hydraulic oil filter
    • 8.9.13 – Check of hydraulic line condition
    • 8.9.14 – Check that the screws of the drive wheel/rollers are tight
    • 8.9.15 – Track service position
    • 8.9.16 – Check of track tension
    • 8.9.17 – Adjusting the track tension
    • 8.9.18 – Checking and replacing the alternator/fan belt tension
    • 8.9.19 – Check and replacement of air filter
    • 8.9.20 – Replacement of fuel filter
    • 8.9.21 – Draining the fuel tank
    • 8.9.22 – Replacing the fuel pre-filter
    • 8.9.23 – Bleeding air from the fuel circuit
    • 8.9.24 – Translation motors and rotation gear motors
    • 8.9.25 – Lubrication of pins
  • 8.10 – Long inactivity periods
  • 8.11 – Long-term storage
• 9 - electrical components
  • 9.1 – Fuses and relays
    • 9.1.1 – Control box fuses
    • 9.1.2 – Control unit relays
  • 9.2 – Work lights replacement
  • 9.3 – LED strip replacement

Fast Download Speeds
Online & Offline Access
Access PDF Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual