Case TH6.26 Telescopic Handler Pdf Operators Manual (92791667 Replaces 92709537)

Case TH6.26 Telescopic Handler Pdf Operators Manual (92791667 Replaces 92709537)

This manual provides essential guidance for operators and maintenance personnel to ensure safe, efficient, and reliable machine performance.

• GENERAL INFORMATION
  • Note to the owner
  • Intended use
  • Electro-Magnetic Compatibility (EMC)
  • Manual scope and required training level
  • Product identification
  • Operator’s manual storage on the machine
  • Machine orientation
  • Machine components
• SAFETY INFORMATION
  • Safety rules and signal word definitions
  • Safety rules
  • Prohibited use
  • Limits of machine use
  • General regulations for use
  • Working on site
  • General safety warnings
  • General notices
  • Driving on public roads
  • Seat belts
  • Ecology and environment
  • Hand signals
  • Safety signs
• CONTROLS AND INSTRUMENTS
  • Access to operator’s platform
    • Driver’s cab
    • Proper entry and exit
  • Operator’s seat
    • Overview
  • Forward controls
    • Steering column
    • Anti-tilt system
    • Right front dashboard
    • Left front dashboard
    • Pedals
  • Right-hand side controls
    • Climate controls
    • Rotary keypad
    • Joystick
  • Display
    • Main display screen
    • Menu page
    • Work page
    • Optional page
    • Radio
    • Alarms
• OPERATING INSTRUCTIONS
  • Commissioning the unit
    • Running-in procedure
    • Refueling
  • Starting the unit
    • Starting the engine
  • Moving the unit
    • Driving modes
    • Forward drive or reverse drive
    • Steering
  • Parking the unit
    • Parking the machine
    • Battery disconnect
• TRANSPORT OPERATIONS
  • Recovery transport
    • Transporting the machine
    • Towing the machine
    • Towing a trailer
• WORKING OPERATIONS
  • General information
    • Load diagrams
    • Rear aux mode
    • Bucket mode
    • Floating boom function (optional)
    • Boom suspension function (optional)
    • Accessory coupling/release
    • Hydraulic connections
    • Stacking
    • Limits of machine use
    • Anti-tilt system
• MAINTENANCE
  • General information
    • Maintenance warnings
    • Diesel fuel – Diesel fuel
    • Biodiesel fuel
    • Engine cooling system
    • Engine oil recommended operating temperature range
    • Fluids, lubricants and capacities
  • Maintenance planning
    • Maintenance chart
  • First 10 hours
    • Front axle oil level – Check
    • Axle planetary gear oil – Check
    • Rear axle oil level – Check
  • Daily
    • Radiator – Cleaning
    • Closing nets – Cleaning
    • Hydraulic oil level – Check
    • Engine oil level – Check
    • Coolant level – Check
    • Tire pressure – Check
    • Indicator and warning lights – Check
    • Hydraulic oil leakage – Check
    • Safety signs – Check
    • Check the electrical system
  • Weekly
    • Air cleaner – Clean
    • Weekly grease fittings
    • Wheel nuts tightening – Check
  • First 50 hours
    • Drive belt – Check
    • Engine oil – Change
    • Engine oil filter – Replace
  • First 250 hours
    • Air cleaner primary element – Replace
    • Front axle oil – Change
    • Rear axle oil – Change
    • Planetary gear oil – Change
    • Negative brake or service brake – Adjust
    • 250 hours grease fittings
    • Return hydraulic oil filter – Replace
    • Hydraulic oil tank breather – Replace
    • Tightening torque of the boom runner screws – Check
    • Tightening torque of the spider screw – Check
    • Gearbox oil – Change fluid
    • Gearbox oil breather – Cleaning
  • Every 50 hours
    • Exhaust pipes – Check
    • Battery – Check
    • Fuel-water separator filter – Drain fluid
  • Every month
    • Front axle oil level – Check
    • Axle planetary gear oil – Check
    • Rear axle oil level – Check
  • Every 250 hours
    • Drive belt – Check
    • Radiator – Cleaning
    • Closing nets – Cleaning
  • Every 500 hours
    • Fuel filter water separator – Replace
    • Fuel filter – Replace
    • Return hydraulic oil filter – Replace
    • Air cleaner primary element – Replace
    • Cab air filter – Replace
    • Cleanfix filter – Replace (if equipped)
    • Hydraulic oil tank breather – Replace
    • Cardan shaft joints – Grease
  • Every 500 hours or yearly
    • Engine oil – Change
    • Engine oil filter – Replace
  • Every 1000 hours
    • Air cleaner safety element – Replace
    • Front axle oil – Change
    • Rear axle oil – Change
    • Planetary gear oil – Change
    • Engine valve clearance – Check and adjust
    • Negative brake or service brake – Adjust
    • Hydraulic hoses and clamp – Check
    • Tightening torque of the boom runner screws – Check
    • Gearbox oil – Change fluid
    • Gearbox oil breather – Cleaning
  • Every 1500 hours
    • Hydraulic oil and filter – Change
  • Every 2000 hours
    • Boom runners – Replace
    • Tightening torque of the spider screw – Check
  • Every 2000 hours or 2 years
    • Engine coolant – Change
    • Cooling system hoses – Replace
    • Fuel hoses – Replace
  • Every 3000 hours
    • Air conditioning – Charging
    • Exhaust Gas Recirculation (EGR) system – Check
    • Diesel Particulate Filter (DPF) – Cleaning
    • Check the fuel injector
    • Evaporator/Condenser filter – Replace
    • Change the air conditioning compressor drive belt
  • When the warning lamp lights
    • Air cleaner – Clean
  • Electrical system
    • Battery
  • Fuse and relay locations
    • Fuses and relays
  • Storage
    • Storing the machine
• SPECIFICATIONS
  • Machine specifications
  • Machine dimensions
  • Machine weights
  • Maximum towable weight
  • Tires
  • Load specifications
• ACCESSORIES
  • Attachments

Fast Download Speeds
Online & Offline Access
Access PDF Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual